 |
|
|
|
|
|
FXS1 Categories: FXS1
| FXS1 Plus
EZLoop® VoIP FXS1 Adapter
#21-106 |
EZLoop®
VoIP PRODUCT CATEGORIES
(Please click on the
drop down menu to choose)
|
| The EZLoop®
VoIP FXS1 Adapter is a one-port telephone adapter with
a four port Switch/Hub.
The EZLoop®
VoIP FXS1 provides Data transfer by
10Mbps, telephone services and T.38 fax over IP network.
The EZLoop®
VoIP FXS1 is most suitable for SOHO and/or
a small-to-medium Internet communication environment.
| Features
|
Easy access to
IP from phone set or PBX |
| Cost Saving - Telephone call
from VPN or public Internet |
Follows the existing telephone
call dial plan |
Easy interface to ADSL/Cable Modem
or Leased line equipment |
|
|
| Software
Specifications
|
| Protocol
Supported |
ITU-T H.323 v2/v3/v4 compliance
SIP RFC3261 |
| Supplementary
Service |
H.450 (Call Hold, Call Transfer, Call
Forward) |
| FAX
Support |
Automatic FAX detection
Group 3 Fax relay at 2.4 - 14.4 kbps
Support T.38 protocol |
| Codec
Supported |
G.711A/u-law, G.723.1, G.729, G.729A,
G.729B, G.729AB |
| Vocie
Quality |
VAD (Voice Activity Detection)
CNG (Comfort Noise Generation)
G.165/G.168 compliant echo cancellation
Programmable Dynamic Jitter Buffer
Bad Frame Interpolation
Provide both in-band and out of band DTMF generation detection
Gain/Attenuation Settings
Provide progress tone: Dial Tone, Busy Tone,
2nd Dial Tone, Call-Holding Tone and Ring-Back Tone |
| QoS |
TOS |
| Caller
ID |
Generation (FSK/DTMF) |
| Tone |
DTMF/CPT (Call Progress Tone) Generation/Detection |
| ADSL
Environment |
PPPoE |
| Firewall
Environment |
Behind NAT Router or IP sharing device |
| Security |
Support H.235 security function |
| Configuration
& Management |
Console port, TELNET and Web Browser
|
| Upgrade |
Firmware upgrade through network by
TFTP/FTP |
| Mechanical Specifications
|
| Power |
Input AC 100V~240V Output
DC12V |
| Operation
Temperature |
41 ~ 104°F (5 ~ 40°C) |
| Humidity |
10% to 90% (Non-condensing) |
| Dimension
and Weight |
6.5” (165mm) W x 1.14”
(29mm) H x 5.47” X (139mm) L
2.22 lbs (1 kg) |
| Console
Interface |
One DB-9 RS-232 COM port |
| Network
Interface |
Four 10/100Base-T Ethernet RJ-45 ports
(auto LAN MDI/MDIX) |
| FXS
Interface |
One RJ-11 Telephone port (FXS)
Programmable AC impedance,Feeding voltage, Ring Voltage,
Ring Cadence, Loop current and
call progress tone
ON-Hook Voltage: 48Vdc
Ring Voltage: 50 V RMS
Loop Current: Constant 23mA |
Dimensions: |
4" x 4" x 1.4" (165mm
x 29mm x 139mm) |
Weight: |
1.5 lbs (0.68kg) |
|
|
|
|
|
